#Schlumberger blueview tiff log viewer install#
#Schlumberger blueview tiff log viewer drivers#
#Schlumberger blueview tiff log viewer driver#

In order for the Printrex 920 printerВ to find theВ black form marker on the fanfold paper (which is located near the paper perforation), so that the print jobs start printing at the paper perforation, be sure to select вЂњForm FeedвЂќ for the вЂњStart-of-job-ControlвЂќ in the Properties of the 920 driver.

#Schlumberger blueview tiff log viewer driver#

Now the driver will print to the network port instead of the USB port, so you may disconnect the USB cable and move the printer to another location on your network. Select a Device Type of Generic, and complete the wizard. Enter the IP address of the printer and continue.Д¤. From the list, select 'Standard TCP/IP Port', then click 'New Port'.ДЈ. Right click on the 920 printer, select Printer Properties, click on the Ports tab, and click the button 'Add Port.'.Дў. While the details of this process vary, for most Windows systems, the following applies:ДЎ. Note that the host computer must also be set up to use a network TCP/IP port to communicate with the printer. Follow the instructions on the dialog page and when finished, connect the printer to your network.

#Schlumberger blueview tiff log viewer install#

After you install the 920 via USB, go to your Devices and Printers page and right click on the printer and select Printer Properties, and click on the 'TCP/IP Address Setup' tab. After the driver has been installed, this is done over a USB connection. If you are installing theВ Printrex 920В for use over an Ethernet-based network, the printer must be correctly configured before connecting via Ethernet. After the second notification, your printer is ready to use. The first notification will say, 'Installing device driver software', and the second notification will say, 'Your device is ready to use'. Now, connect the printer and turn on power: You will see two Tray notifications, a few seconds apart. Once you have finished the Installer, you can connect any Printrex USB printer and the driver will install automatically, even if the printer icon is later deleted from the Printers and Devices folder.Д¦. During the installation of files to the Driver Store, you may see another confirmation dialog asking, 'Would you like to install this device software': Click 'Install'.ДҐ. You should see a User Account Control dialog reply 'Yes'. Don't worry, just turn off the printer and proceed).ДЈ. For best results, start with the printer powered off (If the printer was on and connected, you may see a dialog that says 'Device driver software was not successfully installed'. If you get a Hardware Installation warning dialog, click 'Continue Anyway'Д¦. The Found New Hardware wizard will start:Д«) On the second page of the wizard, select Install the software automatically (Recommended):ДҐ.

#Schlumberger blueview tiff log viewer drivers#

All Printrex drivers are now available to Windows for the next step, Plug-and-Play installation:Д¤. Double-click the installer, and run it to completion. Cancel any Windows installation wizards that start, until you've done the following step:ДЈ. For best results, start with the printer powered off. For the latest driver, please visit our Printrex 920 Technical Support page at, and download the installer to your Desktop.Дў.